AEM 340lph E85-Compatible High Flow In-Tank Fuel Pump 65mm Offset Inlet

  

AEM 340lph E85-Compatible High Flow In-Tank Fuel Pump 65mm Offset Inlet. AEM's 340LPH E85-Compatible High Flow In-Tank Fuel Pumps feature robust internal construction that is designed to withstand the low lubricity characteristics of ethanol and methanol fuels, and are tested to work with ethanol fuels up to E100, methanol fuels up to M100 and all types of gasoline. Its compact, short body design (65mm length) with mounting hooks also makes it ideal in universal applications that have fuel tanks with tight tolerances. The AEM 340LPH E85-Compatible High Flow In-Tank Fuel Pump is designed for in-tank mounting on high performance naturally aspirated and forced induction vehicles. It features a compact 39mm diameter that fits most applications and an offset inlet design that eases installation.

TECHNICAL SPECS:Weight: 10.4oz (294grams)Outside Diameter: 39mm ODLength: 65mmExternal Materials: Black plated steel with laser etching, green/gray end capsInlet Fitting: 7.7mm ID, 11.0mm OD. Offset InlineOutlet Fitting: 8 mm hose clamp.

Flow capability for horsepower support is ultimately dependent on fuel hose diameter, and system electrical voltage and amperage capabilities. The 340LPH E85-Compatible High Flow In-Tank fuel pump includes a wiring harness, pre filter and O-rings. Every AEM 340LPH E85-Compatible Fuel Pump is tested to flow 340 lph at 40 PSI before it is packaged for sale. Please refer to the OEM recommendations for filter replacement for your vehicle. Your vehicle's factory fuel pump wiring may not be adequate enough to handle the current draw of AEM's High Flow Fuel Pumps.

Please refer to the Electrical Requirements section in the instructions document for proper wiring. It is imperative to ensure that the polarity of the electrical plug in your tank is correct for you pump if you choose to use it. If it is not correct you can either re-pin it or use the supplied plug.

Although AEM's High Flow Fuel Pumps are the same physical size as many OEM fuel pumps, they may not be appropriate for a specific application. It is imperative that you check the fuel pump sizing for your vehicle before purchasing an AEM High Flow Fuel Pump.

AEM does not condone or approve of the modification of a tank to accommodate a High Flow Fuel Pump and cannot guarantee the pump's performance or operation if any modifications are made. 10.4oz (294grams) Outside Diameter. Black plated steel with laser etching, green/gray end caps Inlet Fitting. 7.7mm ID, 11.0mm OD.

6 mm Spade (pos/neg) Min Voltage Input. 6 volts Max Voltage Input. 18 volts Current Draw (40 psi). 12 amps (13.5v) Current Draw (80 psi).

15 amps (13.5v) Fuse. Tested and compatible with ethanol fuels up to E100, methanol fuels up to M100 and all types of gasoline. Designed for high output naturally aspirated and forced induction EFI vehicles. Compact body (39mm diameter x 65mm length).

Includes Fuel Pump, installation instructions, wiring harness, pre filter and O-rings (use of stock isolator sleeve is recommended). AEM fuel pumps include a universal pre filter which may not fit certain vehicle applications.